Drainage Systems
Products
- SELF Drainage Systems
- MINI Drainage System
- SPORT Drainage System
- U Drainage System
- UK Drainage System
- S Drainage System
- F Drainage System
- Gratings
- Sump Unit
Information
General Concepts
- Complete Channelling System
- Advantages of Linear Drainage
- Linear Drainage of ULMA
- Advantages of our material for drainage
- What makes us different?
Technical Information
- Standard UNE EN 1433
- Types of Loads
- Locking Systems
- Slope Configurations
- Installation Instructions
- Hydraulic Calculation
You are at ULMA Polymer Concrete > Products >Drainage > Installation Instructions >
Table I: Thickness of concrete bedding
Installation Instructions
Table I: Thickness of concrete bedding
| Load according to Standard EN-1433 | X
Minimum side thickness (mm.) |
Z
Minimum thickness of base (mm.) |
Y
Height of side form |
Recommended wire mesh (cmxcmxmm) | Type of concrete (Kg/cm2) |
|---|---|---|---|---|---|
| A-15 | 100 | 100 | At least at a point located at 40 mm below the level of the pavement. | 150 | |
| B-125 | 100 | 100 | 250 | ||
| C-250 | 150 | 150 | Up to the level of the wire mesh and the adjoining pavement. | 250 | |
| D-400 | 150 | 150 | 15 x 15 x 6 | 250 | |
| E-600 | 150 | 150 | 15 x 15 x 10 | 250 | |
| F-900 | 200 | 200 | 15 x 15 x 12 | 250 |
