Installation instructions for coping
IIstallation instructions for coping - Step by Step
1
Prepare and clean the wall or parapet where the coping is to be placed.2
Place a layer of at least 10-15 mm of mortar with 3/1 cement type on the wall.3
Proceed to open the anchors at the back of the pieces, introducing ourselves in the stern frame or placement zone.4
Place the piece by adjusting, leveling and aligning it correctly. 5
Whenever more than one piece must be placed, display the master along with the already placed piece, marking the joint of 5 mm between pieces..6
Display the following piece near the joint master. Adjust, level and align the piece according to the position of the first piece.7
Clean the joint between the pieces with the master piece sliding it to the exterior and observing carefully that said joint is left perfectly clean in all the thickness.8
Proceed to seal the joints with the Sikaflex PRO 2HP flexible and waterproof element. Repeat operation successively.
